You can upload your 3D files to Mr. Jason by filling out the form below! He will attempt to print them on the library's new Bambu Lab P1S 3D printer (thanks to the generous donors from Delco Gives Day 2025), then contact you to pick up your printed object and pay for it.
Mr. Jason predominately uses the Bambu P1S printer for submitted print jobs. Build volume for our printer is 250mm x 250mm x 250mm (roughly 9.8 inches^3 although if rafts are needed your design should be slightly smaller! If that printer is being used, he will use our Flash Forge Adventurer 3, Makerbot SKETCH, or Ender 3 printers.
Mr. Jason predominately uses the Bambu P1S printer for submitted print jobs. Build volume for our printer is 250mm x 250mm x 250mm (roughly 9.8 inches^3 although if rafts are needed your design should be slightly smaller! If that printer is being used, he will use our Flash Forge Adventurer 3, Makerbot SKETCH, or Ender 3 printers.
Guidelines
We charge $0.20/gram of what is printed (including rafts, supports, etc.) + tax
Objects must not require a lot of supports or have a lot of overhang--the flatter and more surface area on the printbed, the better the results
Only 1 object at a time can be submitted & printed
Only 2 objects a week can be submitted for printing per household
Please allow Mr. Jason & MFL staff 7 days to attempt to print your submitted designs
Designs must be uploaded as .STL files
The library is unable to print the following:
1. Content or objects that are illegal or harmful to minors.
2. Content or objects that may be construed as having intent to harm.
3. Content or objects that may infringe upon the intellectual property rights of a third party.
By submitting content or objects, the customer agrees to assume all responsibility for, and shall hold the Library harmless in all matters related to patented, trademarked, or copyrighted materials. The Library is not responsible for the functionality or quality of content produced on the 3D printer.
Mr. Jason and the MFL staff will NOT:
- Create designs for you
- Troubleshoot & correct design failures
- Assemble designs if they are in multiple pieces
1. Content or objects that are illegal or harmful to minors.
2. Content or objects that may be construed as having intent to harm.
3. Content or objects that may infringe upon the intellectual property rights of a third party.
By submitting content or objects, the customer agrees to assume all responsibility for, and shall hold the Library harmless in all matters related to patented, trademarked, or copyrighted materials. The Library is not responsible for the functionality or quality of content produced on the 3D printer.
Mr. Jason and the MFL staff will NOT:
- Create designs for you
- Troubleshoot & correct design failures
- Assemble designs if they are in multiple pieces
Designs not picked up within 14 days of attempted contact will be kept as examples, or given away as prizes to kids. After designs have been picked up, Mr. Jason & MFL staff will delete the digital file(s) of the object(s) you sent.
PLA Color options for printed objects:
- Beige (Light Brown)
- Black
- Blue
- Chocolate (Brown)
- Clear
- Gold
- Gray
- Green
- Light Blue
- Neon Green
- Orange
- Pink
- Purple
- Rainbow (depending where on roll and how big object is, one or multiple colors may show)
- Red
- Silver
- White
- Yellow
- Black
- Blue
- Chocolate (Brown)
- Clear
- Gold
- Gray
- Green
- Light Blue
- Neon Green
- Orange
- Pink
- Purple
- Rainbow (depending where on roll and how big object is, one or multiple colors may show)
- Red
- Silver
- White
- Yellow
Curious about 3D Printing?
Check out this handy glossary of terms pertaining to 3D printing.
Looking to design a 3D object? Suggested for ages 10+
- Join a 3D Printing Class here! Mr. Jason hosts them for beginners every Wednesday at 4pm. (1 object printed FOR FREE in preferred color per registered participant; must be original designs and smaller than 200mm^3) Sign up on our Library Programs Page!
- Drop in during our Open Hours in the Maker Space! Tuesdays 4-6pm (original designs smaller than 50mm^3 & printed in white/black for free)
- The library has a collection of books that can help you get started with learning how to design for 3D printing! Browse our catalog!
Check out this handy glossary of terms pertaining to 3D printing.
Looking to design a 3D object? Suggested for ages 10+
- Join a 3D Printing Class here! Mr. Jason hosts them for beginners every Wednesday at 4pm. (1 object printed FOR FREE in preferred color per registered participant; must be original designs and smaller than 200mm^3) Sign up on our Library Programs Page!
- Drop in during our Open Hours in the Maker Space! Tuesdays 4-6pm (original designs smaller than 50mm^3 & printed in white/black for free)
- The library has a collection of books that can help you get started with learning how to design for 3D printing! Browse our catalog!
You can also download an .STL file of an object already created on Thingiverse or other similar websites.
Here's a brief explanation of 3D Printing
3D Printing @ MFL Tutorial Videos
Still Need Help or Have Questions?
Use the form to email Mr. Jason.
Thank you!